The following are suggested best practices for the maintenance and care of your Ttereve jewelry:
* Keep jewelry out of humid places such as the bathroom and avoid leaving in extreme environments such as a hot car.
* Apply hairspray, perfume, lotions and other beauty care products before putting on your jewelry. The chemicals can damage sensitive gemstones and tarnish metals, avoiding all contact is best.
* Remove jewelry when cleaning. Ammonia, detergents and other household chemicals will damage jewelry.
* Do not swim at the beach or swimming pool while wearing your jewelry. Chlorine and salt will damage your gemstones and metals.
* Remove jewelry when washing your hands and showering for the same reasons as above.
* Buff gently with a soft cloth before storing to help remove skin oils and contaminates.
* Often the best way to store jewelry is inside a sealed plastic bag such as a ziplock. This seals out moisture and dust and helps prevent tarnish.
* See below for cleaning suggestions.
Many elements used are natural and subject to some flaws and inclusions. These are inherent to the essential character of natural stones and further impart a one-of-a-kind appeal. Please be advised these, if present, are not "sub-par" but unique and beautiful the way nature made them. Each Ttereve stone is hand-picked and collected ensuring quality with a focus on unique colorings, shapes and forms.
Your stone is one-of-a-kind, please take care to prevent knocking it against another object or sharp drops. Almost without exception, if you drop any natural material, it is likely to break. Should your stone need cleaning, rinsing under luke warm water and buffing with a soft cloth is best. A diluted gentle detergent, water, and soft cloth can be used on heavily soiled pieces but avoid ultrasonic cleaners and autoclaves. Ultrasonic cleaners are effective for cleaning some jewelry but the chemicals can damage certain stones and metals and repeated use can loosen stone settings.
Never use toothpaste or other abrasives to clean stones. You will find websites that recommend toothpaste as a cleaner, but this is not an accepted practice by jewelers. They can scuff the surface on amber, lapis, turquoise and other soft stones resulting in the fine polish which was produced by a skilled lapidary to be marred.
Raw metals such as silver, brass, and copper are reactive by nature. This means over time and depending on the environment, frequency of wear, storage conditions, and care, the metal surface can oxidize. These color changes do not harm the integrity of the jewelry. Some metals in Ttereve jewelry are left "raw" to mellow with time; brass for instance becomes warmer and darker, a very desirable organic look when paired with natural stones. Pieces will often brighten when worn, as the metal is buffed by clothing and skin oils, and then darken while in storage. These changes in oxidation are part of the jewelry becoming uniquely yours. Ttereve's patinas and unique finishes are all done by hand and will grow more beautiful with time and wear. To preserve the natural finish, please do not use heavy commercial abrasives, tarnish removers or ultrasonic cleaners. Certain designs are protected with metal sealer or jeweler’s wax to help maintain their finish. In the case of the wax being worn off over time, or for people with exceptionally sensitive skin, the wax may be reapplied at any time to create a barrier protecting both metal and skin. Renaissance Wax is the only wax recommended.
It is not suggested to use cleaners or polishing cloths on metals that have an applied patina. They can remove design elements and leave the piece with an undesirable finish. Raw metals can be cleaned, polished or buffed if a brighter finish is preferred or if the piece needs cleaning. Brightening and polishing can be accomplished with “jewelry polishing cloths” such as a Sunshine® Polishing Cloth. Keep in mind these cloths contain micro polishing agents and they not only will brighten the metal, they will polish it to a more shiny finish. Sunshine® Cloths are wonderful for maintaining, cleaning and polishing silver jewelry.
For general cleaning, buffing with a soft cloth is preferred. Heavily soiled pieces can be rinsed in luke warm water and a mild detergent. When using this method make sure to rinse the jewelry well and immediately dry with a soft cloth. Do not clean your jewelry with water and immediately place in storage; allow to air dry after buffing to ensure all water has evaporated from holes and recesses.
Do not use jewelry dips or metal creams or cleaners, these often contain abrasives or chemicals that are too harsh with unpredictable or uncontrollable results. DIY cleaners such as lemon juice should also be avoided. The acid in lemons can brighten brass but may not give the results desired. All cleaning methods carry risk when cleaning a piece that also contains a stone.
Occasionally, depending on body chemistry, some people experience a phenomenon called greening. Greening is simply a natural reaction between the metal, moisture, air and your body’s chemistry. This reaction is different than a metal allergy, it is a superficial discoloration to the skins surface. Keeping your jewelry dry, clean, and away from sweat, beauty care products and water will help prevent greening. We are constantly releasing chemicals from our bodies and that, especially when combined with beauty care products and their various ingredients, can result in temporary skin discolorations. This is difficult to predict as everyone’s chemistry is different but will not affect the integrity of the jewelry when general care guidelines are followed.
If greening is a concern, you can apply jeweler's Skin Guard (available in a brush-on form) to contact areas, such as ring bands, to aid in prevention. Renaissance Wax is wonderful for creating a barrier between metal and skin and rings come with the wax already applied.
The silver pendant is made with fine silver which is 99.9% pure silver (sterling silver is 92.5%) and is more resistant to tarnish than sterling. Wearing silver jewelry frequently is the best technique for preventing tarnish as the skin’s oils form a natural protective barrier. The copper pendant is solid copper and will, over time, develop a unique patina according to your chemistry.
Please do not dip your pendant in silver or metal cleaners, or an ultrasonic bath, as this could potentially remove the hand applied antiqued patina. You may use a “jewelry polishing cloth” such as a Sunshine® Polishing Cloth to buff and shine the raised surface of your pendant if ever needed. Your pendant comes sealed with a transparent jeweler’s wax to protect and maintain the finish. In the case of the wax being worn off over time, or removed during polishing, the wax may be reapplied. Renaissance Wax is the only wax recommended.
If you would like a professional cleaning, polish, or waxing or in the unlikely event your jewelry requires repair please contact: